4G WIRELESS NETWORK
Abstract
The
Third-Generation (3G) wireless technologies offer wireless web, SMS, MMS, EDGE,
WCDMA, GPRS etc. 4G is a packet
switched technology, uses bandwidth much more efficiently, allowing each user's
packets to compete for available bandwidth. It solves
the non-standardization problems associated with 3G. Data transfer rate will be
20 to 100 Mbps, which is 10 to 50 times than 3G and 10-20 times faster than
ADSL. Operating frequency range will be 3 to 10 GHz and the IPv6
protocol will be used. In this paper, fundamentals of 4G and their various
proposed architectures are explained. In India it can be used to network rural
and urban areas, reduce cost of communication, flourish educational activities,
facilitate research and development, faster internet connectivity, more
cellular options, real time information systems, crisis management,
Tele-medicines and many more. The present 3G networks need not to be discarded,
and can be used in conjunction with 4G technology. There are various
architectures
1.
Introduction
The fourth-generation wireless (4G) technology implements designs
that will take the wireless telecommunication industry beyond 2010. The infrastructure
of the 4G will function on top of the current existing CDMA, GSM and TDMA. It
extends the 3G capabilities These technical opportunities strengthen the user
mobility and encourage the deployment of the mobile technologies for the
development of various (mobile) applications providing information, orientation
(routing) and other helpful services.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjtX6kpTwqBApqhKZRxjdFp3s33eJZA7_cr2gUSGrgBi1vwPMZGNRGQq4byoxMdChbxKy_9_soiOVB2kLcsddUTeTKqQZ6fYkSyRVQxHMHvXT02swmXQINXHfk-tMPsQJ7_FDfaOn0XYd8/s1600/4g1.jpg)
It will deliver
superior quality video and data, in addition to voice. It also solves the non-standardization
problems associated with 3G networks for voice, video and data transmission.
The data transfer rate is 20 to 100 Mbps, which will be 10 to 50 times those
offered by 3G links and 10-20 times faster than standard ADSL (Asymmetric
Digital Subscriber Line) services. The operating frequency ranges between 3 to
10 GHz and the IPV6 protocol used will be used. High-definition television
programming through wireless broadband connections, Internet-based
multi-channel video and higher mobile Internet will become a reality. The
Defense Advanced Research Projects Agency (DARPA) in the US originally
conceived of 4G.
2.
Need of 4G:
·
3G performances insufficient to
meet high performance future needs.
·
Multiple incompatible
standards. Global mobility and service portability required.
·
Need for hybrid networks for
both WLAN and cellular network design.
·
Technology to utilize newly
found modulation methods.
·
Need for All IP network with
converged voice and data capability.
·
Wider bandwidth.
3.
Characteristics
3.1 End-to-End Internet Protocol (IP):.
It will provide access through a collection of
radio interfaces, seamless roaming/handover and the best-connected service,
combining multiple radio access interfaces (such as WLAN, Bluetooth and GPRS)
into a single network that subscribers may use. It allows any mobile device to
seamlessly roam over different wireless technologies automatically, using the
best connection available for the intended use. Users will have access to
different services, increased coverage, the convenience of a single device, one
bill with reduced total access cost, and more reliable wireless access even
with the failure or loss of one or more networks.
3.2 Peer-to-Peer networks: In this system, every device is both a transceiver and a
router/repeater for other devices in the network, elimination of a single node
does not disable the network. 4G can be defined as "wireless ad hoc
peer-to-peer networking."
4. Significance
of 4G
In 4G networks, users
joining the network add mobile routers to the network infrastructure. Network
capacity and coverage is dynamically shifted to accommodate changing user
patterns. Wherever the concentration of people is more in one area, additional
routes are created, thus enabling additional access to network capacity. Users
will automatically hop away from congested routes to less congested routes.
This permits the network to dynamically and automatically balance capacity and
increase network utilization. As number of users increases, the service
improves for all users.
5. Features of
4G
High speed: 100 Mbps in stationary mode with an average of
20 Mbps when traveling.
High network capacity: Should be at least 10 times that of 3G systems.
Fast/seamless handover across multiple networks: 4G wireless networks should support global
roaming across multiple wireless and mobile networks,
Next-generation multimedia support: fast
speed and large volume data transmission at a lower cost than today.
MIMO techniques : The benefit of array or multiple antennas for spatial diversity
has long been realized. Yet only recently were they combined with advanced
coding techniques to from extremely efficient MIMO (Multiple Input Multiple
Output) systems.
Wireless access technologies: OFDMA (Orthogonal Frequency – Division Multiple Access )
and MC-CDMA (Multiple Carrier CDMA) are the main contender for the future
system. Another more radical access scheme for the downlink, yet better in
terms of throughput, is a single queue packet based system
6. Future
applications
Sensors on public vehicles Cameras in traffic lights
Tele-medicine: a paramedic assisting a victim of a traffic accident in a
remote location could access medical records (e.g., x-rays) and establish a
videoconference so that a remotely-based surgeon could provide "on-scene"
assistance.
Crisis-management applications: In case of any natural disasters where the
entire communications infrastructure has collapsed, restoring communications
quickly is essential. With 4G networks it can be set up in a matter of hours.
In comparison, it may take days or even weeks to re-establish communications
capabilities when a wire line network fails.
7.
Possible Architectures on 4G
One of the most challenging problems facing deployment of 4G
technology is how to access several different mobile and wireless networks.
Three possible architectures: using a multi-mode device, an overlay network, or
a common access protocol.
7.1 Multimode devices (Fig2):
A single physical terminal with multiple
interfaces to access services on different wireless networks. The multimode
device architecture may improve call completion and expand effective coverage
area. It should also provide reliable wireless coverage in case of network,
link, or switch failure. The device itself incorporates most of the additional
complexity without requiring wireless network modification or employing
inter-working devices. Each network can deploy a database that keeps track of
user location, device capabilities, network conditions, and user preferences.
The handling of quality-of-service (QoS) issues remains an open research
question.
Fig 2. A
multimode device lets the user, device, or network initiate handoff between
networks without the need for network modification or interworking devices.
7.2 Overlay mode (Fig 3)
:
In this architecture, a user accesses an overlay network consisting
of several universal access points. These UAPs in turn select a wireless
network based on availability, QoS specifications, and user-defined choices. A
UAP performs protocol and frequency translation, content adaptation, and QoS
negotiation-renegotiation on behalf of users. The overlay network, rather than
the user or device, performs handoffs as the user moves from one UAP to
another. A UAP stores user, network, and device information, capabilities, and
preferences. Because UAPs can keep track of the various resources a caller
uses, this architecture supports single billing and subscription. Satellite
network Fixed wireless network.
Fig 3. An overlay network—consisting of several
universal access points (UAPs) that store user, network, and device
information—performs a handoff as the user moves from one UAP to another.
7.3 Common access protocol
(Fig4):
This protocol becomes viable if wireless
networks can support one or two standard access protocols. One possible
solution, which will require interworking between different networks, uses
wireless asynchronous transfer mode. To implement wireless ATM, every wireless
network must allow transmission of ATM cells with additional headers or
wireless ATM cells requiring changes in the wireless networks. One or more
types of satellite-based networks might use one protocol while one or more
terrestrial wireless networks use another protocol. Wireless LAN Cellular
network
Fig 4. A device capable of
automatically switching between networks is possible if wireless networks can
support a common protocol to access a satellite-based network and another protocol
for terrestrial networks.
7.4
The proposed Architecture for 4G:
Fig 5.
Several networks can be converged with the 4G networks providing all kinds of
services to the users.
Fig 5 shows the real scenario of how 4G can really mingle with the present technology and scale upward to give more bandwidth and lower the cost. Security will be a major issue when several networks will be connected together.
A legal
subscriber can view various television networks in his/her handset, browse
through to the internet at a very high speed connectivity, send e-mails
remotely, reserve train or air tickets from any part of the country, stay
connected with their professors and many more things at a very reduced cost.
Repeaters
will give mobile Internet at a speed of 20mbps; optical cables can also
contribute to the data transmissions. Different organizations can stay
connected with each other and their customers,
8.Conclusion
4G is the next upcoming wireless technology. It holds a lot of
promises in solving today’s problems and tomorrows needs. 4G will also make worldwide roaming using a
single handheld device. 4G networks may eventually deliver on all the promises.
At times, it seems that technological advances are being made on a daily basis.
These advances will make high-speed data/voice-over-Internet-protocol (VoIP)
networks a reality. In the meantime, it is important for industry to develop a
strong 3G offering that is palatable for the general public. Equally as
important, industry must ensure that expectations are realistic and that
services meet and exceed those expectations. If all goes according to what the
industry envisions, it may be sooner, rather than later that we will see
wireless communications evolve. This evolution will give the general public as
well as the public safety community amazing functionality from the convenience
of a single handheld device.
·
International
forums on 4G mobile, By : Lucant technologies, bell labs innovations
·
Fraunhofer Institute for Secure
Telecooperation (SIT) August 02. [bayarou|rohr]@sit.fraunhofer.de
·
Information Raining for Mobile
Hotspots in 4G Wireless Networks : Shahrokh Valaee , Department of Electrical
and Computer Engineering ,University of Toronto, Toronto, Ontario, Canada,
Email: valaee@comm.utoronto.ca